Manufacturer in Kaunas · design, manufacturing, installation, service

AK-2 lift at a multi-storey facade

Photos show real Ekodarna installations; visualisations are labelled.

AK-2 · Open platform lift

AK-2 – a lift for greater heights

An open platform lift for greater heights – up to 6 m – for terraces, galleries and upper floors. With gates and guarding, outdoors or indoors.

  • up to 6 mheight
  • up to 450 kgrated load
  • Hydraulicdrive
  • Outdoor and indoorsetting
PricePer projectThe lift is engineered for the site. Send the height and a photo – we prepare a proposal within one working day.

We design, manufacture, install and service in-house.

Is it right for my space?

Where AK-2 fits best

Terraces and galleries

Access to high terraces or galleries without stairs.

Upper floors

An external entrance to an upper floor where there is no room inside.

Outdoor installation

Fixed to a building facade or a timber terrace.

Guarding at height

Lockable gates; platform gates for greater heights.

No shaft

Open structure – no masonry shaft needed.

Simple controls

Remote controls.

If your situation differs
Up to 1.5 m AK-1 is usually enough. For an enclosed cabin or several stops inside a building, choose KN-45.

Installation and configurations

How installation works

AK-2 extends the AK family to greater heights. The 1100 × 1400 mm platform travels on a hydraulic drive, with lockable gates at the upper level and on the platform. Structure and finish are matched to the facade or terrace.

What to send with your request

  • Photo of the stairs / place
  • Approximate height
  • Indoors or outdoors
  • Available width
Upload site photos

Technical specification · REV 2026-10

AK-2 technical data

Key data
Maximum lifting heightup to 6 m
Rated loadup to 450 kg
Platform size (width × length)1100 × 1400 mm
Number of stopsConfirmed per project
Speed0.15 m/s
Site and installation
EnvironmentOutdoor and indoor
Operating temperature−20 °C to +30 °C
ShaftNot required
PitConfirmed per project
Drive and controls
DriveHydraulic
Power supply230 V or 400 V, 50 Hz
ControlsTwo remote controls
Safety and finishes
Gates and ramp flapsLockable gates; platform gates for greater heights
Conformity and documentsConfirmed per project

“Confirmed per project” means the value depends on the configuration or is being confirmed by the manufacturer – we confirm it in the technical proposal. Final suitability is confirmed after reviewing the site and technical requirements.

Documents

Technical documents

Need a DWG/DXF drawing or installation requirements for your project? For architects and designers

Get an AK-2 solution for your site

Send a few photos and an approximate height. We review the site and propose a solution – no obligation.